|
|
| |
|
|
Energy
|
|

SKU #: 4553
|
RC-70
Energy RC-70 Floor Standing Speaker
Price List: $1,100.00
Our Price: $895.00
You save: $205.00
|
|
|
|
*Technical Data:
- Priced as each
- You must order two pieces
- Free Shipping Within the ContinentalU.S.
- Patented Driver Technology
- This full-spectrum three-way system uses a wide dispersion 1" aluminum dome tweeter for smooth and silk highs, a 5.5" Kevlar midrange driver with ribbed elliptical surround, and for deep bass down to 31 Hz, dual 6.5" Kevlar woofers with ribbed elliptical surrounds. The rear vented bass reflex cabinets contributes to the gorgeous sound quality.
- High output and incredible musicality are the result of the patented Ribbed Elliptical Surround. The patented shape of the surround reduces surround distortion from an average of 14% to 20%, while increasing useable piston area. The Elliptical Surround therefore increases speaker efficiency due to its greater surface area and with 30% more excursion than the competition, it creates tighter, deeper bass, with greater accuracy and detail. Exclusively designed ribs are molded into the surround to eliminate surround deformation, a common problem with all drivers.
- The Ribbed Elliptical Surround is mated to a Kevlar cone that is light, rigid and non-resonant, which creates high levels of detail and sonic accuracy. Instead of using traditional "off the shelf" Kevlar, Energy engineers spent months researching the ideal thickness and weave for a driver, to create the best blend of stiffness and damping. This unique interlace pattern and thickness of material is required to eliminate many of the issues commonly found with Kevlar, including edge-holes and dispersion anomalies. The Kevlar material is further coated with a proprietary resin compound to increase rigidity and uniformity.
- The aluminum phase plug and vented magnet structure increase the cooling ability of the driver, which augments the power handling of all Reference Connoisseur models. Using a cast basket for a stiff and inert chassis greatly assists in further reducing resonances and distortion that could otherwise exist with materials that are not as rigid and uniform.
- Speaker System: Bass Reflex, Rear Vented
- High-frequency driver: 1" Aluminum Dome Tweeter,
- Midrange driver: 5-1/2" Kevlar Ribbed Elliptical Surround
- Bass drivers: dual 6-1/2" Kevlar Ribbed Elliptical Surround
-
- Recommended Amplifier Power: up to 250 watts RMS
- Impedance: 8 ohms nominal
- Minimum Impedance: 4 ohm
- Frequency response: 31 Hz-23 kHz +/- 3dB
- Usable Bass Response: -10 dB Anechoic @ 26 Hz
- Anechoic Sensitivity: 92 dB; 2 speakers in a typical room:
95 dB Crossover Points: 600Hz, 2.4kHz Dimensions: 39-7/8" high, 7-3/4" wide, 15" deep
* Technical data provided by Energy
|